Dodge Oxygen Sensor
Every vehicle produced in the United States is equipped with an oxygen sensor. The use of oxygen sensor is made mandatory not merely because it enables automobiles to operate with a balance mixture of air and fuel but more than this, it is also needed to reduce harmful emission. Yes, gasoline engine runs best when the air-fuel mixture is correct. It is also by having a balanced mixture that you can be sure that less harmful gases are released by your auto. Even the catalytic converter in the exhaust system prefers a well-controlled mixture. In your Dodge vehicle, the Dodge Oxygen Sensor detects the air-fuel ratio by measuring the amount of oxygen in the exhaust gases. Depending on the signal sent by the oxygen sensor, the fuel injection system will trim the mixture richer or leaner.
Generally, every Dodge O2 Sensor is installed in the area where the hot exhaust gases pass through - the exhaust manifold. Typically, the sensing element is made up of a zirconium ceramic bulb that is coated on both sides with a thin layer of platinum and comes in both heated and unheated forms. The data that the sensor collects is sent to the engine management ECU or electronic control unit which then adjusts the mixture to give the engine the best possible fuel economy and lowest possible exhaust emission. When the oxygen sensor fails, there will be a great chance of damage in the catalytic converter as well as costly repairs. The oxygen sensor's demise is commonly the result of aging, use of leaded fuels, or sensor contamination with silicones or silicates.
Although performing preventive maintenance will keep your auto components functional, you cannot still avoid the need to replace some parts after a long time. In fact, getting replacements is also a major part of a responsible automotive maintenance. But because you know that you can get the best deal by shopping right here with us, replacing your stock and damaged Dodge Oxygen Sensor will not burden you. Its' easy, fast, and safe! Check us out!
